Quantcast
Channel: ToManual.com » camshaft timing
Viewing all articles
Browse latest Browse all 6

2000 Jaguar S-Type (X200) Primary Timing Chain LH

0
0

Download 2000 Jaguar S-Type (X200) V8-4.0L (AJ28) – Left-Hand Primary Timing Chain LH. Special Service tools Camshaft Setting Tool 303-530 Timing chain tensioning tool 303-532 Wedges, primary chain 303-533 Variable Camshaft Timing Oil Control Unit Setting Tool 303-654 Crankshaft setting, main tool 303-645 Removal 1. Remove the right-hand bank primary timing chain. See: Right-Hand 2. Remove the VVT solenoid. 3. Remove the VVT bush carrier. 4. Install the camshaft locking tool 303-530 to the left-hand bank camshafts, aligning the shafts as necessary. 5. Loosen the exhaust camshaft sprocket bolt. 6. Loosen the intake camshaft VVT unit bolt. 7. Remove the primary chain tensioner bolts. 8. Remove the tensioner assembly. 1. Remove the tensioner. 2. Remove the tensioner back-plate. 9. Remove the chain tensioner blade. 1. Remove the tensioner blade pivot bolt. 2. Remove the tensioner blade. 10. Remove the left-hand bank timing chain. Installation 1. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket. Reposition the sprocket (and the VVT unit) for the most advantageous position for use of the tool. Remove the tool. 2. Install the primary timing chain. 1. Install the primary chain over the crankshaft sprocket and the VVT unit sprocket. There must be no slack on the drive side of the primary chain and the VVT unit must not be rotated on the camshaft . 3. Install the primary chain tensioner blade. 4. Install the primary chain tensioner assembly. 1. Use a wedge 303-533 (or two if required) between the primary chain tensioner and tensioner blade, to take up the slack in the chain. 5. Tighten the exhaust camshaft sprocket securing bolt. 1. Install the chain tensioner tool 303-532 to the sprocket holes. Apply force to the tool in an anticlockwise direction to tension the chain on its drive side. 2. While applying the opposing force to sprocket and chain, tighten the sprocket bolt to 120Nm


Viewing all articles
Browse latest Browse all 6

Latest Images

Trending Articles





Latest Images